240sx/Skyline/Z32 rear suspension package - 20% off
240sx/Skyline/Z32 rear suspension package - 20% off
240sx/Skyline/Z32 rear suspension package - 20% off
240sx/Skyline/Z32 rear suspension package - 20% off
240sx/Skyline/Z32 rear suspension package - 20% off

20% off combo price
The GKTECH rear suspension package is designed for those that are looking for a combo as opposed to piecing a kit together one by one and for buying as a combo we are offering a 20% discount.

REAR LCAS
Newly designed, low weight (6lb) V2 GKTECH Rear Adjustable Lower Control Arms are good for adjusting track width, wheel fitment, and most importantly eliminate passive rear wheel steering/compliance steering. The Lower control arms offer +15/15mm perpendicular to the centreline of the chassis.

For more information
V2 240SX/SKYLINE/Z32 ADJUSTABLE REAR LOWER CONTROL ARMS

REAR KNUCKLES
Feature dual calliper brackets as standard, allowing to fit factory Nissan 2 pot callipers either side, in addition to the factory Z32/Skyline drum e-brake. Clearance for GTR driveshaft's, high quality PTFE lined spherical bearings throughout and have all new kinematics to drastically improve anti-squat, bump steer, camber gain curves and raised roll centre height.

For more information
V2 240SX/SKYLINE/Z32 REAR KNUCKLES WITH ALL NEW KINEMATICS

REAR CAMBER ARMS
When you lower your car negative camber is introduced. This reduces the contact patch of your tyres and thus available traction. These camber arms allow for approximately -3/+3 degrees of camber adjustment.

For more information
V4 - 240SX/SKYLINE/Z32 REAR CAMBER ARMS (RUCA'S)


REAR TOE ARMS
When you lower your car the rear toe is largely effected. This effects rear toe adjustment, and can cause the car to crabwalk, be unpredictable, unsafe and cause rapid tyre wear. Having adjustable rear toe arms will correct this issue.

Choice in rear toe arms is subframe specific, eg if you car is running an S13 subframe select S13 toe arms. If your car is running an S14 subframe then select S14 toe arms.

For more information
V4 - 240SX/SKYLINE/Z32 REAR CAMBER ARMS (RUCA'S)
V4 - S14 240SX/R33 SKYLINE REAR TOE ARMS


REAR TRACTION RODS
Rear traction rods allow adjustment forward or backward of the rear knuckle assembly. They can be adjusted to eliminate bump steer, anti-squat and alter other rear suspension traction settings to improve suspension response.

For more information
V4 - 240SX/SKYLINE/Z32 ADJUSTABLE REAR TRACTION RODS

We now have spanners to make your life easier, seen here -ย 
Double open ended wrenches

GKTECH

240sx/Skyline/Z32 rear suspension package - 20% off

From $1,692.00 USD
SKU: SRRSP

What is a Backorder?

Q: What is backorder?

When a product is on backorder, it means that we have sold out and we are opening a back order due to popular demand. This is essentially a queue, when new stock arrives from production, weโ€™ll send your order.

Q: Will items in my order that are in stock be shipped out first?

We will send your order altogether once your backorder item is ready! You may wish to place separate orders if you want an item before the other is due back in stock.
Fast Dispatch
Checking Dispatch Times... * We do aim to achieve this every day, but please note that this is not a guarantee and is subject to daily order volumes.
Free Shipping + Priority Post options available Free USA wide shipping on orders over $230 * We offer FREE STANDARD SHIPPING* within the USA when you purchase $230 or more in a single order.
Store Pickup Pickup available at Albuquerque NM

Order and get reward points

Earn 5% back in reward points

Product enquiry

20% off combo price
The GKTECH rear suspension package is designed for those that are looking for a combo as opposed to piecing a kit together one by one and for buying as a combo we are offering a 20% discount.

REAR LCAS
Newly designed, low weight (6lb) V2 GKTECH Rear Adjustable Lower Control Arms are good for adjusting track width, wheel fitment, and most importantly eliminate passive rear wheel steering/compliance steering. The Lower control arms offer +15/15mm perpendicular to the centreline of the chassis.

For more information
V2 240SX/SKYLINE/Z32 ADJUSTABLE REAR LOWER CONTROL ARMS

REAR KNUCKLES
Feature dual calliper brackets as standard, allowing to fit factory Nissan 2 pot callipers either side, in addition to the factory Z32/Skyline drum e-brake. Clearance for GTR driveshaft's, high quality PTFE lined spherical bearings throughout and have all new kinematics to drastically improve anti-squat, bump steer, camber gain curves and raised roll centre height.

For more information
V2 240SX/SKYLINE/Z32 REAR KNUCKLES WITH ALL NEW KINEMATICS

REAR CAMBER ARMS
When you lower your car negative camber is introduced. This reduces the contact patch of your tyres and thus available traction. These camber arms allow for approximately -3/+3 degrees of camber adjustment.

For more information
V4 - 240SX/SKYLINE/Z32 REAR CAMBER ARMS (RUCA'S)


REAR TOE ARMS
When you lower your car the rear toe is largely effected. This effects rear toe adjustment, and can cause the car to crabwalk, be unpredictable, unsafe and cause rapid tyre wear. Having adjustable rear toe arms will correct this issue.

Choice in rear toe arms is subframe specific, eg if you car is running an S13 subframe select S13 toe arms. If your car is running an S14 subframe then select S14 toe arms.

For more information
V4 - 240SX/SKYLINE/Z32 REAR CAMBER ARMS (RUCA'S)
V4 - S14 240SX/R33 SKYLINE REAR TOE ARMS


REAR TRACTION RODS
Rear traction rods allow adjustment forward or backward of the rear knuckle assembly. They can be adjusted to eliminate bump steer, anti-squat and alter other rear suspension traction settings to improve suspension response.

For more information
V4 - 240SX/SKYLINE/Z32 ADJUSTABLE REAR TRACTION RODS

We now have spanners to make your life easier, seen here -ย 
Double open ended wrenches

Warning Icon

WARNING: Cancer and Reproductive Harm. http://www.p65warnings.ca.gov

VEHICLE COMPATIBILITY

Nissan

R32 SKYLINE GTS-T
R33 SKYLINE GTS-T
R34 SKYLINE GT-T
S13 KA24 240SX
S13 KA24 HATCH
S13 SR20 240SX HATCH
S13 SR20 240SX/SILVIA
S14 240SX/SILVIA
S15 SILVIA
Z32 300ZX