The GKTECH R32/R33 GT-R front lower control arms allow for up to an increase in track of 1.57" (40mm) (0.78" (20mm) each side).
These arms are designed based off CMM data, they are CAD designed, FEA tested, have CNC machined ends and the main body is laser cut from 4130 Chromoly Steel.
These arms are adjustable, at their minimum length they are OEM length and adjust out to +0.78" (+20mm) over OEM.
These arms have been designed with the OEM knuckle in mind, meaning they will work with the OEM knuckle and the lock stop has been designed with the ability to work when used with an OEM style tie rod end or an aftermarket unit (like the one we make) with bump steer correction.
Finally, the arms are E-coated (electrophoresis coating) for rust prevention.
- Adjustable from OEM to +0.78" (+20mm)
- Designed to be used with OEM knuckle
- Extended lock stop for use with OEM or aftermarket tie rod ends
- CMM measured, CAD designed, FEA tested
- CNC machined ends
- Laser cut 4130 Chromoly steel design
NOTE: You do not need to run our tension rods (pictured) as as such, they are optional. If running an alternate brand of tension rods with studs rather than bolts, you will need to press the studs out and replace with the included bolts.
GKTECH
R32/R33 GTR / GTS4 Skyline Front Lower Control Arm
What is a Backorder?
Q: What is backorder?
When a product is on backorder, it means that we have sold out and we are opening a back order due to popular demand. This is essentially a queue, when new stock arrives from production, we’ll send your order.Q: Will items in my order that are in stock be shipped out first?
We will send your order altogether once your backorder item is ready! You may wish to place separate orders if you want an item before the other is due back in stock.The GKTECH R32/R33 GT-R front lower control arms allow for up to an increase in track of 1.57" (40mm) (0.78" (20mm) each side).
These arms are designed based off CMM data, they are CAD designed, FEA tested, have CNC machined ends and the main body is laser cut from 4130 Chromoly Steel.
These arms are adjustable, at their minimum length they are OEM length and adjust out to +0.78" (+20mm) over OEM.
These arms have been designed with the OEM knuckle in mind, meaning they will work with the OEM knuckle and the lock stop has been designed with the ability to work when used with an OEM style tie rod end or an aftermarket unit (like the one we make) with bump steer correction.
Finally, the arms are E-coated (electrophoresis coating) for rust prevention.
- Adjustable from OEM to +0.78" (+20mm)
- Designed to be used with OEM knuckle
- Extended lock stop for use with OEM or aftermarket tie rod ends
- CMM measured, CAD designed, FEA tested
- CNC machined ends
- Laser cut 4130 Chromoly steel design
NOTE: You do not need to run our tension rods (pictured) as as such, they are optional. If running an alternate brand of tension rods with studs rather than bolts, you will need to press the studs out and replace with the included bolts.
Choose options
FAQs
How hard are these to fit?They are quite easy to install but mechanical knowledge is required and recommended.
We include an assembly guide on most product pages, that can be seen above. You are also welcome to get in touch if you need help.
But apart from that, remove your standard LCA's and caster rods and the LCA's will bolt straight in.
Do I need to do any other modifications to get the most from these LCA's?
You can bolt them in as they are, however, you would only increase your track and caster angle.
Ideally, you would use these alongside aftermarket caster rods.
Will these fit my car?
We can only confirm fitment for the vehicles listed above under "confirmed fitment".
How long is the warranty on these arms?
All GKTECH suspension arms come with a lifetime warranty against manufacturing defects.
VEHICLE COMPATIBILITY
Nissan
R32 SKYLINE GTRR32 SKYLINE GTS4
R33 SKYLINE GTR
R33 SKYLINE GTS4
Goes with your build
Picked just for you 😘
