The easily available rear brake upgrade you've been looking for!
With the release of the GKTECH 'TRACK' Edition Brake Calipers, it was the perfect time to make a complete kit for upgrading both S/R Chassis rear brakes!
These are OEM quality reproduction 350Z/Z33 Brembo/Track model rear brake calipers, a popular upgrade with the use of our Weld On Bracket! These two products paired together allows for a simple solution for upgraded rear brakes on your S/R Chassis
- Calipers and Brackets sold in PAIRS
- CNC machined steel brackets
- Includes hardware
- Optional brake pads
- High quality black powder-coat finish
Note: Can only be used with OEM CAST steel knuckle
Note 1: You will need to upgrade to the larger Z33/350Z track model rotors (322mm). These are readily available through most part stores.
Note 2: OEM S/R Chassis calipers use different mounting bolts, when upgrading to track edition calipers you will need the correct M12 x 1.75 x 30 hardware for OEM knuckle.
Note 3: Available without brake pads for those looking to BYO, if you do not have pre existing pads available make sure to select those when adding to cart.
Note 4: 240SX/S14/S15 will need rear conversion brake lines. R32/R33 do NOT require conversion brake lines
GKTECH
350Z REAR BREMBO TO S CHASSIS/R32/R33 WELD ON CONVERSION
What is a Backorder?
Q: What is backorder?
When a product is on backorder, it means that we have sold out and we are opening a back order due to popular demand. This is essentially a queue, when new stock arrives from production, we’ll send your order.Q: Will items in my order that are in stock be shipped out first?
We will send your order altogether once your backorder item is ready! You may wish to place separate orders if you want an item before the other is due back in stock.The easily available rear brake upgrade you've been looking for!
With the release of the GKTECH 'TRACK' Edition Brake Calipers, it was the perfect time to make a complete kit for upgrading both S/R Chassis rear brakes!
These are OEM quality reproduction 350Z/Z33 Brembo/Track model rear brake calipers, a popular upgrade with the use of our Weld On Bracket! These two products paired together allows for a simple solution for upgraded rear brakes on your S/R Chassis
- Calipers and Brackets sold in PAIRS
- CNC machined steel brackets
- Includes hardware
- Optional brake pads
- High quality black powder-coat finish
Note: Can only be used with OEM CAST steel knuckle
Note 1: You will need to upgrade to the larger Z33/350Z track model rotors (322mm). These are readily available through most part stores.
Note 2: OEM S/R Chassis calipers use different mounting bolts, when upgrading to track edition calipers you will need the correct M12 x 1.75 x 30 hardware for OEM knuckle.
Note 3: Available without brake pads for those looking to BYO, if you do not have pre existing pads available make sure to select those when adding to cart.
Note 4: 240SX/S14/S15 will need rear conversion brake lines. R32/R33 do NOT require conversion brake lines
Choose options
FAQs
Can I still keep my e-brake?Good question! The 350Z rear calipers/rotor setup can be used in conjunction with a Skyline/Z32 rear drum setup.
How hard are these to fit?
Mechanical and fabrication knowledge is required. If you're not a competent welder, take to someone that is.
Can I replace my front brakes to 350Z calipers also while doing this rear upgrade?
Yes! You'll need to drill the front knuckle hole from 12mm to 14mm and trim your OEM dust shield. The complete brake line conversion kit for S Chassis will need to be purchased
How can I run a dual caliper with this bracket & caliper?
You can't as you need to run the same caliper on the other side and this bracket does not fit on the other side of the knuckle.
Will these fit my car?
We can only confirm fitment for the vehicles listed above under "VEHICLE COMPATIBILITY".
I have Skyline (R32, R33, R34) calipers currently, do I need new brake lines?
No, if you have Skyline calipers currently on your car you don't need new brake lines.
I have S-chassis (S14/S15) calipers currently, do I need new brake lines?
Yes, you will require new brake lines with fittings that fit Brembo calipers
VEHICLE COMPATIBILITY
Nissan
C33 LAURELC34 LAUREL
C35 LAUREL
CEFIRO A31
R32 SKYLINE GTR
R32 SKYLINE GTS-T
R33 SKYLINE GTS
R33 SKYLINE GTS-T
S13 KA24 240SX
S13 KA24 HATCH
S13 SR20 240SX HATCH
S13 SR20 240SX/SILVIA
S14 240SX/SILVIA
S15 SILVIA
Goes with your build
Picked just for you 😘
