Z34 370z/G37 no cut cold air intake kit

Very very good service, I ordered sunday and it arrived on my doorstep wednesday morning. Super easy and straight forward install. Also a noticeable difference in sound and power gain without a tune too. I do wish the kit came with a sticker

I had previously installed the Stillen short tube intakes which performed satisfactorily during cold engine conditions. However, during prolonged operation for approximately thirty minutes, heat soak was observed resulting in reduced engine performance, sometimes leading to derated or degraded engine timing. In contrast, the current intakes have proven to be reliable without any issues, and are economically priced in comparison to the Z1 Motorsport options available from the United States. It is noteworthy, however, that installation without cutting would necessitate excessive force to fit the silicone hose which could compromise air flow by up to a quarter of the intended size. As a solution, I opted to cut the hole through which the hose is passed and the result is a properly fitting and unobstructed installation

The item is great but if the c pipes were aluminium instead of silicone would have been much better.

Its a nice kit, good quality construction and fits in pretty easily (once you work out how to get the bumper off!).
The issue I had though is I have a 2008 V36 Sedan with a VQ35HR. The PCV system is a bit different to the VQ37VHR and so the crank breather setup means the breather tubes on the pipes are at the wrong angle. I wasnt able to make it work with the included 16mm silicone tubing but I found a $25 16mm heater hose with the correct U bend and kink bend to chop up and make it work.

Installation was a breeze. Everything fit as it should. Great alternative to others like z1. Came packaged exceptionally well. Fixed my acceleration lag and heat soak issues (previous owner) 5/5 would order again.