The GKTECH S/R chassis rear knuckle reinforcement plates have been designed to brace the OEM rear knuckles where it needs it. If you've been drifting these cars for a while now, you would have seen the OEM cast knuckles break off on the balljoint mount and the toe arm mount, usually happening in spectacular fashion.
We've made reinforcement easier than ever with our laser cut, pre-folded, ready to weld in plates.
This is considered a must-do modification, as the OEM parts get older (more abused) and the difficulty of finding a replacement increases (and more expensive), we find it important to refresh and improve on OEM parts. Available separately for those who don't feel the need to reinforce all points.
- CAD Designed
- CNC Laser Cut from 0.19' (5mm) C30 steel
NOTE: Sold as a set (i.e. left and right hand side)
NOTE: This is a DIY item that requires welding
NOTE 2: This is not compatible with the alloy Z32 TT/GTR/R34 GT-T knuckles
GKTECH
240sx/Skyline Rear Knuckle Reinforcement Weld In Kit
What is a Backorder?
Q: What is backorder?
When a product is on backorder, it means that we have sold out and we are opening a back order due to popular demand. This is essentially a queue, when new stock arrives from production, we’ll send your order.Q: Will items in my order that are in stock be shipped out first?
We will send your order altogether once your backorder item is ready! You may wish to place separate orders if you want an item before the other is due back in stock.The GKTECH S/R chassis rear knuckle reinforcement plates have been designed to brace the OEM rear knuckles where it needs it. If you've been drifting these cars for a while now, you would have seen the OEM cast knuckles break off on the balljoint mount and the toe arm mount, usually happening in spectacular fashion.
We've made reinforcement easier than ever with our laser cut, pre-folded, ready to weld in plates.
This is considered a must-do modification, as the OEM parts get older (more abused) and the difficulty of finding a replacement increases (and more expensive), we find it important to refresh and improve on OEM parts. Available separately for those who don't feel the need to reinforce all points.
- CAD Designed
- CNC Laser Cut from 0.19' (5mm) C30 steel
NOTE: Sold as a set (i.e. left and right hand side)
NOTE: This is a DIY item that requires welding
NOTE 2: This is not compatible with the alloy Z32 TT/GTR/R34 GT-T knuckles
Choose options
FAQs
Will this fit my car?We can only confirm fitment for the vehicles listed above under "vehicle compatibility". If your car is not listed there, then we don't know if it will fit.
Do you make these to suit other cars?
We only sell the parts listed on our website. If it's not listed on our website, then we don't sell it, sorry.
What's the advantage of using the GKTech weld in reinforcement plates?
Although not as common as broken rear subframes, the OEM cast knuckles can break off on the balljoint and toe arm mount.
What modifications are required, is this hard to fit?
No modifications are required, simply just remove OEM rear knuckles and weld the plates in.
Is there anything else needed for installation?
You will need a welder. In terms of the plates, they will arrive as shown in the product photo.
Can I install this myself?
If so how long will installation take? Yes, provided you have welding experience. Welding in of the kit should take around 15 minutes + removal/refit time
VEHICLE COMPATIBILITY
NOTE: 2: This is not compatible with the alloy Z32 TT/GTR/R34 GT-T knuckles
Nissan
C33 LAURELCEFIRO A31
R32 SKYLINE GTS-T
R33 SKYLINE GTS-T
R34 SKYLINE GT
R34 SKYLINE GT-T
S13 KA24 240SX
S13 KA24 HATCH
S13 SR20 240SX HATCH
S13 SR20 240SX/SILVIA
S14 240SX/SILVIA
S15 SILVIA
Goes with your build
Picked just for you 😘
