Infiniti G35/ Z33 350z hydraulic e-brake setup - (10% combo discount)

Nobody likes wasting time setting up a hydraulic e-brake kit!

If you want to avoid wasting time shopping around for all the individual parts, getting custom brake lines made up or running generic parts that may or may not work then we suggest having a look at our complete hydraulic e-brake kit.

This kit has everything you need to set up a dual caliper hydro e-brake in your car, just BYO calipers.

The contents:
E-brake assembly:
Self explanatory, this is the e-brake assembly that houses the lever and master cylinder.

E-brake handle:
This beautifully crafted CNC machined aluminium lever has been designed with ergonomics in mind whilst being aesthetically pleasing. Eg. it is comfortable and it looks good. Choose between silver, black, blue, pink, purple, red, orange, gold or neo chrome.

Master cylinder:
Choose between 5/8" and 3/4". For non Brembo calipers our recommendation is 5/8" and for the Brembo calipers we recommend the 3/4". More on that below in the FAQ's.


Chassis specific e-brake mount:
Our chassis specific e-brake mounts are designed to ensure that our e-brake assembly can be fitted in an optimal position without the need to cut or drill into your transmission tunnel. We have made 2 different postition variants in addition to LHD or RHD specific.

Inside trim = mounts inside/within the center console itself, this will require trimming to the center console for the levrer.

Outside trim = mounts outside the center console itself, no modifications required to the trim when used on either the left and right-hand side.

More info on the brackets can be seen here: https://us.gktech.com/z33-350z-car-specific-e-brake-mount

Note that our inside trim e-brake support base additional brace will not fit G35's. The base can be used on G35's but the optional support brace will not fit.

Braided lines:
Made in-house in Australia using stainless steel fittings and using stainless steel braided line with a PTFE outer these lines are made specifically to suit Nissan S/R chassis' and even include the P clips to locate the line throughout your vehicle.

Dual caliper brackets: Weld in or bolt on?
The GKTECH 350z bolt on dual caliper brackets feature CNC machined 6061-T6 aluminium and allow the use of Brembo calipers or the non Brembo calipers.

The brackets only space the hub out 8mm and do not require any modifications to fit and also allow the use of the drum e-brake.

If you are running aftermarket knuckles that already have the provision for dual caliper brackets (like our knuckles) then you don't need this bracket and it can be de-selected. We include extended e-brake studs, which are a unique product in themselves to us and ensures you have enough thread overlap on the nuts securing them down, due to being spaced out from the plate.

Alterntively, if you're a bit handy with a welder you can opt for the "weld in" dual caliper bracket. This option is cheaper and has the added benefit of not spacing the hub out. Not spacing the hub out = no need for axle spacers and it won't push your wheel out.

Axle spacers:
As our dual caliper bracket spaces the hub out 8mm this results in the driveshaft essentially being stretched that 8mm to compensate for the thickness of the plate. This can now be taken up with the use of an axle spacer.

We have different sized options available as it is also a good opportunity to select a different size axle spacer if you were running a different diff/driveshafts combination or have a very low vehicle.This can now be taken up with the use of an axle spacer. Available in 5mm or 10mm. 10mm is recommended when using the dual caliper brackets.

NOTE #1: We can only confirm fitment on our axle spacers with OEM Z33/G35 wheel bearings. Will not fit Z34/G37 and may not fit with aftermarket wheel bearings.

NOTE #2: Console version will require some trimming under the center console and require you to cut a hole for the lever.

NOTE #3: Inside and outside mounts refer to the position of the e-brake lever when using our mounting plates.

NOTE #4: Outside mount when used on the drivers side may have contact with the OEM seat when the seating position is close to the steering wheel, the OEM seat can still be used but can cause damage with prolonged use.

NOTE #5: Will NOT fit on automatic vehicles. The automatic tunnel differs to the manual tunnel.