V3 Z33 350z/G35 Steering Angle Kit now with ackerman adjustment
V3 Z33 350z/G35 Steering Angle Kit now with ackerman adjustment
V3 Z33 350z/G35 Steering Angle Kit now with ackerman adjustment
V3 Z33 350z/G35 Steering Angle Kit now with ackerman adjustment

GKTECH

V3 Z33 350z/G35 Steering Angle Kit now with ackerman adjustment

From $309.00 USD
SKU: Z33XANGLECOMBO

What is a Backorder?

Q: What is backorder?

When a product is on backorder, it means that we have sold out and we are opening a back order due to popular demand. This is essentially a queue, when new stock arrives from production, we’ll send your order.

Q: Will items in my order that are in stock be shipped out first?

We will send your order altogether once your backorder item is ready! You may wish to place separate orders if you want an item before the other is due back in stock.
Pickup available at Albuquerque NM Usually ready in 24 hours

V3 Z33 350z/G35 Steering Angle Kit now with ackerman adjustment

Albuquerque NM

Pickup available, usually ready in 24 hours

8524 Indian School Rd NE
Albuquerque NM 87112
United States

📦

Free Shipping on orders over $250

Checking Dispatch Times...

Product enquiry

The GKTECH V3 Z33 350z/G35 angle kit is a simple, lightweight, yet super effective bolt on steering kit.

It is a bolt on kit, meaning it can be fitted and removed with no modifications. A completely reversible install, even when used with our Super Lock Lower Control Arms!

With 30% faser steering these are suitable for both the dedicated drift cars whilst working equally as well for a grip/street car looking to speed your steering up.

If you own one of these vehicles, you would know the OEM steering angle on the Z/G chassis sucks! We measured them to having around 37 degrees lead wheel and even less trailing. This kit will allow you to get around 60 degrees of lock lead wheel and with adjustable ackerman you can acheive near parallel front steering.

We strongly recommend our bolt on rack spacer to make the most of the kit but they are an optional item as some people may already have a rack spacer. (SOLD SEPARATELY).

To get the most out of your 350Z/G35 angle kit and to correct the poor geometry of the OEM 2pc lower control arm, we recommend our Super Lock Lower Control Arms as seen here:
https://us.gktech.com/350z-g35-4130-chromoly-super-lock-lower-control-arms

More information on this can be seen in the FAQ below.

- 30% faster steering
- Adjustable ackerman
- Circa 60 degrees of steering lock

NOTE: Ensure to set the lock stop prior to the caliper hitting the strut on lock.

FAQs

Does installing this kit require a wheel alignment?
Yes, it alters both toe so a wheel alignment will be required after installation.

Will this fit my car?
We can only confirm fitment for the vehicles listed above under "vehicle compatibility". If your car is not listed there, then we don't know if it will fit.

Is there anything else needed for installation?
There is not, however, in terms of the kit itself it will arrive as shown in the product photo.

Can I install this myself? If so how long will installation take?
Yes, provided you have general mechanical knowledge as they are relitively straightforward. Installation time should be around 30 minutes. However, being a suspension component we recommend only a trained professional to install this product

What size wheel specs should I use for the best clearance?
Whilst this usually has a really large number of variables (Tyre size, ride height, shock stiffness, wheel spacers, LCA length and more!) it's very simple with the Z33 350Z/G35! Answer: Any! Well, within reason. But we've tested all the way from 9.5 -17 on an 18" wheel and up to a 19x10 with a 255! My recommendation is an 18x9.5 +12/20 with a 235/40/18, these are very popular wheel and tyre sizes with HEAPS of clearance. By using a common wheel and tyre size, it keeps it affordable and it keeps it easy to get spares/access to more at the track (in case of emergency!).

If you have a crazy wheel spec and still have clearance, get in touch! We'll share it here!

Although, whilst there is no reason to bash the chassis. The 350z/V35's have a HUGE swaybar up front which is not ideal. Some customers choose to remove this which certainly helps with clearance on set ups using OEM lower control arms.

Do I need bolt on rack spacers?
It is not completely neccessary, if you are chasing lock, then we do recommend the bolt on rack spacers this will allow for more travel of the rack, which results in more steering lock.

If you are not chasing steering lock and just want to have faster steering and then the bolt on rack spacers are not a requirement.

Should I get offset rack spacers or bolt on rack spacers?
This boils down to your setup, if you have low offset wheels and adjustable arms already and feel as if, if you had more lock the steering may over center, then we recommend the offset rack spacers, as they still provide adequate rack travel while also mitigating over-centering.

If your setup is fairly standard and you just want to obtain more steering lock, then I would just recommend the bolt on rack spacers, which to date is adequate.

I already have inner tie rod ends that have rack spacers built in, should I get your bolt on rack spacers?
The aim of the game is to unlock the full potential of the steering rack through rack spacers. If you inner tie rod ends already have them built in, thats fine and they still can be used, but we do recommend checking if that is a limiting factor (assuming they are shorter then the ones we recommend) if they are then we suggest the bolt on rack spacers, because who doesn't like more lock right? ...... right!

What is the difference between the V1 and V2?
The V1 had adjustable bump steer correction, however, we have now fixed it in place as it wasn't super beneficial to have it adjustable. The position it is fixed in now is optimal and allows for an easy install.

Also, we have changed the design ever so slightly to avoid any modifications or grinding to the OEM knuckle.

This means it is now 100% reversible.

Are there any special tools required?
No, a spanner set will do the job which we do sell separately here - Double open ended wrenches

VEHICLE COMPATIBILITY

NOTE:
Nissan G35 Skyline Coupe (2003-2007 only)
Nissan G35 Skyline Sedan (2003-2006 only)

Nissan

Z33 350Z

Infiniti

G35

Customer Reviews

Based on 98 reviews
90%
(88)
7%
(7)
0%
(0)
3%
(3)
0%
(0)
P
Pavly khalel
Great parts & customer service.

Super easy install, fantastic quality, great for the price. Will definitely be buying more parts in the future.

P
Pinku Style Garage
Pinku Style Garage Approves

GK Tech Japan and Aus both have provided me multiple parts for my shoes demo 350z which will also be used in Pro drift comps and time attack events at Ebisu, Tsukuba, Nikko, Mobara etc. Great website which let's you know real time stock. Great packaging
Buy with comfort
#pinkustyle

J
Julius

Nice angle for affordable price

L
Lubomir Smahlik
Great!

Very fast delivery and communication, i recommend!

J
Josiah
Rubbing against my lower control arm

So I had just installed the angle kit and it was rubbing against my control arm which makes it very annoying to drive like almost undriveable so I added a one inch spacer to hopefully help by it’s still in rubbing I have stock g35 rims on with 215/55/r17 on what else can I do so prevent it from rubbing ?