A LONG AWAITED UPDATE
We've had a VERY busy few months and we're thrilled to share our latest update with you - potentially the last before they are available!
Firstly, we appreciate your patience throughout this endeavour, we have been doing our absolute best to make our conversion hubs available as soon as possible and we wouldn't have done this without your support.
Want to be on the waiting list for PRE BUY?
CLICK HERE
Want to be on the waiting list for PRE BUY?
CLICK HERE
Update #1 - Front Brake solutions
Due to the design of the front hubs we found ourselves in a position where a new front rotor should be offered. As we've identified 3 different models with 3 different brake options (GT, GTS and Brembo) we have teamed up with HFM to make a slotted rotor specific to this setup!
277 x 24 rotor (GT models)
- Upgrade front calipers to GTS and use our 293mm rotors
- Upgrade front calipers/rotors to Brembo and re-drill rotors
293 x 24 rotor (GTS models)
- Our rotors will be a direct replacement for this brake setup
326 x 30 rotor (Brembo PP brakes)
- Rotors will need to be redrilled to suit 5 x 114.3
- The ID of these is large enough to clear our hubs
Update #2 - The hubs are ready
We have officially completed all testing! From high mileage loaded machine testing to on car fitment, track and daily driving. Front and rear, they're ready to go!
A big focus of the testing was ensuring the wheel bearings were up to a standard we were happy with, we're stoked that the bearings have met and exceeded all expectations throughout the testing process and remain within the drawing tolerances no matter what we throw at them.
Update #3 - The price
The question everyone has been asking: What's it going to cost?
We've done our best on this, as always trying to offer affordable bolt on solutions with every product. Here's the final RRP pricing:
Front hubs = $399
Rear hubs = $449
Front rotors = $240
Total = $1088 USD
Rear hubs = $449
Front rotors = $240
Total = $1088 USD
Update #4 - Will there be a pre buy?
Absolutely! Once we confirm the exact ETA for them to be in stock all waiting list customers will get early access (with that, a pre-buy discount) so be sure to keep an eye on your emails as it's within months that these will be available to you!
As always, we are full steam ahead on our BRZ / GT86 and GR86 development. Be sure to see what we've been up to here: us.gktech.com
Want to be on the waiting list for PRE BUY?
CLICK HERE
Check out some more photos here!
